mangler Module

Gabriel Vasile

FhG FOKUS

Edited by

Gabriel Vasile


Table of Contents
1. User's Guide
1.1. Overview
1.2. Dependencies
1.2.1. SER Modules
1.2.2. External Libraries or Applications
1.3. Exported Parameters
1.3.1. contact_flds_separator (string)
1.4. Exported Functions
1.4.1. sdp_mangle_ip(pattern, newip)
1.4.2. sdp_mangle_port(offset)
1.4.3. encode_contact(encoding_prefix)
1.4.4. decode_contact()
1.4.5. decode_contact_header()
2. Developer's Guide
3. Frequently Asked Questions
List of Examples
1-1. Set db_url parameter
1-2. sdp_mangle_ip usage
1-3. sdp_mangle_port usage
1-4. encode_contact usage
1-5. decode_contact usage
1-6. decode_contact_header usage

Chapter 1. User's Guide

1.1. Overview

This is a module to help with SDP mangling. Still in testing.


1.2. Dependencies

1.2.1. SER Modules

The following modules must be loaded before this module:

  • No dependencies on other SER modules.


1.2.2. External Libraries or Applications

The following libraries or applications must be installed before running SER with this module loaded:

  • None.


1.3. Exported Parameters

1.3.1. contact_flds_separator (string)

First char of this parameter is used as separator for encoding/decoding Contact header.

Warning

First char of this field must be set to a value which is not used inside username,password or other fields of contact.Otherwise it is posible for the decoding step to fail/produce wrong results.

Default value is "*".

Example 1-1. Set db_url parameter

...
modparam("module", "contact_flds_separator", "-")
...

then an encoded uri might look sip:user-password-ip-port-protocol@PublicIP


1.4. Exported Functions

1.4.1. sdp_mangle_ip(pattern, newip)

Changes IP addresses inside SDP package in lines describing connections like c=IN IP4 Currently in only changes IP4 addresses since IP6 probably will not need to traverse NAT :)

The function returns negative on error, or number of replacements + 1.

Meaning of the parameters is as follows:

  • pattern - A pair ip/mask used to match IP's located inside SDP package in lines c=IN IP4 ip. This lines will only be mangled if located IP is in the network described by this pattern. Examples of valid patterns are "10.0.0.0/255.0.0.0" or "10.0.0.0/8" etc.

  • newip - A string representing the new IP to be put inside SDP package if old IP address matches pattern.

Example 1-2. sdp_mangle_ip usage

...
sdp_mangle_ip("10.0.0.0/8","193.175.135.38");
...

1.4.2. sdp_mangle_port(offset)

Changes ports inside SDP package in lines describing media like m=audio 13451.

The function returns negative on error, or number of replacements + 1.

Meaning of the parameters is as follows:

  • offset - A string representing an integer which will be added/substracted from the located port.

Example 1-3. sdp_mangle_port usage

...
sdp_mangle_port("-12000");
...

1.4.3. encode_contact(encoding_prefix)

This function will encode uri-s inside Contact header in the following manner sip:username:password@ip:port;transport=protocol goes sip:enc_pref*username*ip*port*protocol@public_ip * is the default separator.

The function returns negative on error, 1 on succes.

Meaning of the parameters is as follows:

  • encoding_prefix - Something to allow us to determine that a contact is encoded publicip--a routable IP,most probably you should put your external IP of your NAT box.

Example 1-4. encode_contact usage

...
if (src_ip == 10.0.0.0/8) encode_contact("enc_prefix","193.175.135.38"); 
...

1.4.4. decode_contact()

This function will decode the URI in first line in packets wich come with encoded URI in the following manner sip:enc_pref*username*ip*port*protocol@public_ip goes to sip:username:password@ip:port;transport=protocol It uses the default set parameter for contact encoding separator.

The function returns negative on error, 1 on succes.

Meaning of the parameters is as follows:

Example 1-5. decode_contact usage

...
if (uri =~ "^enc*") { decode_contact(); }
...

1.4.5. decode_contact_header()

This function will decode URIs inside Contact header in the following manner sip:enc_pref*username*ip*port*protocol@public_ip goes to sip:username:password@ip:port;transport=protocol. It uses the default set parameter for contact encoding separator.

The function returns negative on error, 1 on succes.

Meaning of the parameters is as follows:

Example 1-6. decode_contact_header usage

...
if (uri =~ "^enc*") { decode_contact_header(); }
...

Chapter 2. Developer's Guide

The module does not provide any sort of API to use in other SER modules.


Chapter 3. Frequently Asked Questions

3.1. Where can I find more about SER?
3.2. Where can I post a question about this module?
3.3. How can I report a bug?

3.1. Where can I find more about SER?

Take a look at http://iptel.org/ser.

3.2. Where can I post a question about this module?

First at all check if your question was already answered on one of our mailing lists:

E-mails regarding any stable version should be sent to and e-mail regarding development versions or CVS snapshots should be send to .

If you want to keep the mail private, send it to .

3.3. How can I report a bug?

Please follow the guidelines provided at: http://iptel.org/ser/bugs